Programming for cable box – GE RM94901 User Manual

Page 7

Text mode
Original mode

Programming for Cable Box

1. Manually turn on

the Cable Box.

2. Press and hold the

SETUP button until
the INDICATOR
LIGHT lights, then
release the SETUP
button.

3. Press and release

the CAB button (the
INDICATOR LIGHT
will blink then
remain lit).

4. Find the three digit

code for your
Cable Box in the
code list in the
back of this book
and enter it using
the Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.

5. Aim the remote at

your Cable Box and
press the POWER
button. Your Cable
Box should turn off.

Note: If your Cable Box does not respond, try
all the codes for your brand. If the codes do
not work, or your brand is not listed, try the
Code Search method on page 8.

6. With your Cable Box

on, press CHANNEL
UP. If the Cable Box
responds, no further
programming is
required.

7. Enter your code here

for easy reference.

BLINK

OFF

CABLE BOX CODE

94901 Revised Size 1/29/02 2/25/02 4:15 PM Page 7