GE 681131692083 - Manual (Page 9)

Client: PIL (Wal*Mart)
Project: 169208
Language: EN
Date: 15.04.2009
Version: 06
Page: 9 (of 13 pages)
9
OPERATION
Note: Program setting is only possible when clock time is set.
•
Press prog (9) once (ill. j ) and operate hr (13) and min (10) buttons ( Setting time)
to set the program start time.
• Press prog (9) again to save settings.
Note: The program will be stored automatically if no button is operated for 5 seconds
and the clock time will again be displayed.
•
To change or view program settings press prog (9) again. The program start time
appears on the LCD display (12) for 5 seconds. Press hr (13) and min (10) to modify
the program ( Setting time).
• Press prog (9) to activate the program. prog button (9) lights up and the LCD display
(12) shows program start time for 5 seconds. Brewing will start after the program
start time is reached.
Note: Program activation is only possible when the on/off key (14) is turned off.
Note: When program function is running, the prog button (9) light will go out. You can
deactivate the program before it starts by pressing
prog (9) for 3 seconds. The prog (9)
button flashes 5 times to indicate the deactivation.
Note: The program function, if already set, will be deleted if you unplug the coffee maker
from the outlet. The coffee maker will need to have the time and program modes reset.
Automatic shut-off
• The coffee maker will shut off automatically after one hour of operation.
• The coffee maker will turn on the next day at the same time, if
the appliance remains connected to the outlet, and if
the program function is active. The prog button (9) is lit to indicate active status.
• Please make sure to refill the coffee maker with coffee and water for next use.
Warning: The coffee maker is hot during operation. Handle hot coffee carefully.
Warning: Always turn coffee maker off when not in use.
CM-169208-EN-06.indd 9 4/15/09 8:02:04 PM