Grace Digital TUNER GDI-IRDT200 - Manual (Page 22)

22
Sleep Timer
5. Turn the Dial until the display says
< Set Time/Date >
6. Press the ‘Select’ button.
Set Alarm
DST
Pacific
Central
Eastern
7. Turn the Dial until the correct time zone is seen on the display. Push the ‘Select’ button to
set your time zone. Then turn the Menu Dial until the hour setting is correct, then press the
‘Select’ button.
Set Time
1:30 PM
8. Turn the Dial until the minute setting is correct, then press the ‘Select’ button.
Set Time
1:34 PM
The display shows with the new time shown beneath for 3 seconds, then returns
to the menu, press the ‘Back’ button 2 times to go to the main menu.