Gold's Gym PLATINUM GGBE1658.0 - Manual (Page 9)

9
8. Insert the Long Pad Tube (36) into the bracket
on the Front Leg (4). Slide two Foam Pads (22)
onto the Long Pad Tube, and press a Pad Cap
(23) into each Foam Pad.
Repeat this step with the two Short Pad
Tubes (21).
9. Attach the Bumper (30) to the Curl Bar (17)
with an M4 x 19mm Screw (51).
Attach the Curl Bar (17) to the Leg Lever (5)
with the Curl Bar Pin (33). Then, attach the
Tether (34) on the Curl Bar Pin to the Leg Lever
with an M4 x 19mm Screw (51).
10. Attach the Curl Pad (20) to the Curl Post (6)
with two M6 x 20mm Screws (47).
8
9
10
23
23
17
30
51
5
33
34
51
20
6
47
4
22
22
36
21
21
Bracket