Global Machinery Company EAC30 - Manual (Page 4)

4
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Specifications
EAC30 EAC40
Power: 2HP/1600W
Voltage: 230–240V ~ 50Hz
No load speed: 2850 min -1 2850 min -1
Discharge pressure: 0.8 MPa(115 psi) 0.8 MPa(115 psi)
Tank capacity:
30 litres 40 litres
Air outlet size: 6.35mm (1/4”) 6.35mm (1/4”)
Net weight: 29kgs 34kgs
Cut-in pressure (factory set): 0.6MPa (85psi)
Cut-out pressure (factory set): 0.8MPa (115psi)
Maximum output pressure: 0.8MPa (115psi)
Free air delivery:
127 l/min 150 l/min
(4.5 CFM) (5.4 CFM)
Pump displacement: 206 l/min 216 l/min
(7.2CFM) (7.65CFM)
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.