Giant VERSION 3.0 User Manual
Page 21
21
COIL SPRUNG FORKS
Springs on these types of forks are set at the factory. Most have a simple preload adjuster that allows
the rider to make the fork firmer or softer depending on rider weight. The heavier the rider, the firmer
the spring setting should be.
If with no preload you are not achieving the recommended sag
then a softer spring is needed and if with maximum preload you are achieving too much sag
then a harder spring is needed.
To check rebound, turn the rebound damping knob (if applicable) counter clockwise until it stops. With
full body weight, push down on the fork forcefully with the front brake on and watch (and feel) how the
fork rebounds. Turn the rebound damping knob clockwise until the fork rebounds slightly slower than
with no damping (the heavier the rider, the more damping will be required).
SUGGESTED FRONT SUSPENSION SAG GUIDE (ALL TYPES)
FORK TRAVEL (mm)
SAG (mm)
85/85
12-17
100 15-20
120
18-30
140/145 28-37
170
34-50
180 36-54
200
40-60