Genz-Benz SHENANDOAH. 60LT User Manual

Page 6

SHENANDOAH™ STEREO 60LT

ENGINEERING SPECIFICATIONS

INPUTS
XLR Balanced input impedance:

2.2 k ohms

XLR Balanced input sensitivity:

-60 to -30 dBV

¼” Unbalanced input impedance:

300 k ohms

¼” Unbalanced input sensitivity:

-30 to +4 dBV

AMPLIFIER OUTPUT
Power at 4 ohm load:

30 watts per side RMS, 60 watts total

THD + N (preamp):

<0.035%

THD + N (power amp):

<0.07%

Frequency response:

20 Hz -20 kHz +/- 1dB

CHANNEL EQUALIZATION
Low frequency:

125 Hz shelving, +/-15dB

Mid frequency (sweep):

250 Hz - 5 kHz , peaking, +/-12dB

High frequency:

8 kHz shelving, +/-15dB

DIRECT OUTPUTS
XLR balanced output level:

-30 dBV nominal

XLR balanced output impedance:

150 ohms

¼” unbalanced output level:

+4 dBv nominal

¼” unbalanced output impedance:

1k ohm

DIGITAL EFFECTS
Processor type:

WAVE FRONT™ STEREO DSP engine

Internal processing:

24 bit

A/D converter

24 bit - 64X oversampling

D/A converter:

24 bit - 128X oversampling

Dynamic Range:

80 dB

THD + N (1 kHz)

<0.01%

Sampling rate:

48 kHz

Due to continuing product improvements and changes, all specifications are subject to change without notice.