Grizzly H0600 - Manual (Page 6)

H0600 12V Cordless Trimmer -5 -
BEFORE YOU START
The battery in your new cordless power
tool will not be fully charged when you
receive it. Follow the instructions below to
charge your battery.
Battery charging with the standard
charger :
1. Plug the power cord for the charger
into the 110/120V outlet.
2. Insert the battery into the charger.
The battery fits into the oval recess in
only one way. Do not force the bat-
tery. Insert until it locks into place.
3. The red LED light on the charging unit
will come on when the battery begins
its charging cycle.
4. Charge battery for 3-5 hours for a full
charge from a fully depleted condi-
tion. The red LED will not go off until
the battery is removed from the
charger base.
Fig 1. Location of controls.
On/Off Trigger
Trimmer
Blades
Rechargeable
Battery
Trigger Lock Button
Control Location
Refer to Figure 1 for the location of the key
components and controls of the machine.
Become familiar with the controls and all of
the adjustments and settings before oper-
ating the Trimmer
Operating Tips
Avoid overloading the trimmer by cutting
objects too large for the blades. A good
indication of motor stress is by listening to
the sound it makes. If the speed drops and
it sounds like the motor is struggling, it
probably is. Use common sense when
using this trimmer, and it will give you
many years of trouble-free service.