Garmin SL40 - Manual (Page 15)

Installation
Apollo SL40 Installation Manual 9
Slit 1/4" (2X)
Clamp Nut
0.375
0.031
- Slide clamp nut over coax.
- Strip coax as illustrated.
- Cut two 1/4" slits in jacket 180
degrees apart.
Braid Clamp
Cap
Solder Center
Conductor
Step 1.
Step 2.
Step 3.
- Slide braid clamp over end of coax and
under the braid.
- Insert coax with braid clamp into
connector and tighten clamp nut securely.
- Solder the center conductor of the coax
to the contact as illustrated.
- Attach the cap and secure tightly.
Assembly instructions for right angle connector part #162-1008
0.125
Figure 4 Coax Connector Assembly