Gefen DVI to RGBS with Scaler EXT-DVI-2-RGBSS - Manual (Page 13)

10
OUTPUT SIGNAL CONFIGURATION
HOW TO CONFIGURE THE DVI TO RGBS WITH SCALER OUTPUT SIGNAL
There is a bank of 2 dip switches on the underside of the DVI to RGBS with
Scaler unit that controls which type of signal is output. Please remove the
metallic tape on the underside of the unit to reveal this bank of switches. Use the
guidelines below to output your desired signal type.
DIP Switch 1 DIP Switch 2 Output Signal Type
ON ON R/G/B/S 5V Sync
ON OFF R/Gs/B/Gs
Default
OFF ON R/G/B/S 0.3V Sync
OFF OFF Y/Pb/Pr/Y Component
DIP Switch Positions
1
ON
ON
OFF
2
KE
1
DIP
Switches