Direct code entry – GE 24962 User Manual
Page 7

7
Direct Code Entry
Write your codes down here for easy reference
later.
1. Press and hold the
SETUP button until
the red indicator stays on, then release
the
SETUP button.
2. Press and release the desired mode
button (
TV, DVD, etc.). The red indicator
blinks, then stays lit.
3. Enter the 4-digit code
from the code tables
(on separate sheet).
Note: after a valid code
entry, the red indicator
turns off. For an invalid
code, the red indicator
flashes.
4. With your device on, press
ON/
OFF. If the device turns off, no
further programming is required.
Note: If some buttons do not
operate your equipment, try one
of the other codes for your brand.
Device
Device stored Code
TV
TV
DVD
SAT/CBL
This manual is related to the following products: