GN Netcom GN 6110 - Manual (Page 14)

15
The headset’s audio indicators:
Headset action Audio indication
Volume Limit Repeated single high tone when min. or max.
limits achieved (when button is pressed)
Low Battery Tone Two rapid high tones repeated every 20 seconds
Out of Range No audio indications; gradual deterioration of
audio quality
Incoming Call from Mobile Ring tone A
Incoming Call from desk phone Ring tone B (only when using hook switch)
Pairing Confi rmation
– with base
– with mobile
2 single tones
1 single tone
Establish Audio Link Series of tones, low to high
Initiate Voice Dial Single low tone
Voice Tag not Recognised Dual high-low tone
End Call/Audio Link Closed Series of tones, high to low
Power ON/OFF No audible tone
The headset’s visual indicators:
Headset mode Headset indicator
Power Off OFF (no charger)
Charging in Process ON (charger plugged in, or headset placed in
base)
Charging Complete OFF (charger plugged in, or headset placed in
base)
Pairing Mode ON (no charger) with headset boom arm opened
Pairing Successful Series of 10 rapid fl ashes
Audio Link (on a call) Rapidly fl ashes
Headset ON
Headset ON and in range of base Continuous single fl ash (slow)
Continuous double fl ash (slow)
Opened boom arm (turn ON) Lights for two seconds
Closed boom arm (turn OFF) Lights for two seconds
Test link established Rapidly fl ashes
The base’s visual indicators:
Base’s on-line indicator On-line indicator
On-line with a call Flashes
Base’s pairing indicator Pairing indiator
Pairing Mode ON
Pairing Successful Series of 10 rapid fl ashes
Base reset Successful Lights for two seconds
GN6110_contents_EU_07-11-03.indd 15 20-11-2003, 14:39:28