Generac 02010-2 - Manual (Page 35)

Generac ® Power Systems, Inc. 33
2.7.6 POWER SUPPLY CORD
The power supply cord must comply with all applic-
able codes, standards and regulations. It must be
large enough to handle the full amperage to which it
will be subjected.
2.7.7 GROUND FAULT CIRCUIT INTERRUPTERS
The National Electrical Code (NFPA 70, 551-7)
requires that you install ground fault circuit inter-
rupters (GFCIs) on all external and some internal
electrical receptacles. Contact your manufacturer or
dealer for recommendations.
◆ ◆
Section 2 – Installation
PRIMEPACT 50 Recreational Vehicle Generator
Figure 2.18 – Transfer Switch Isolation Method
Figure 2.19 – Installation With Isolation Receptacle