Grizzly BASS COMBO H5524 - Manual (Page 2)

INPUT —Connect your guitar here, using a shielded instrument cable with a 1 ⁄
4
" jack.
VOLUME —This knob controls the pre-gain level.
PRESENCE —This circuit provides a gradual boost in the upper frequency output for better articulation.
The boost begins at 2 KHz and provides a maximum output increase of approximately 10 dB.
3 BAND EQUALIZATION —The main equalization of the Model H5524 is a classic 3-band passive net-
work. All pass (no band cut) is attained with the controls in the full clockwise position—unlike active
controls which exhibit a “flat” setting at the 12 o’clock positions.
LINE OUTPUT —A line level output is provided for sending a signal from the preamp section to a mixing
console for live performance or recording purposes.
HEADPHONES OUTPUT —For connection to almost any headphone with a 1 ⁄
4
" jack.
CD/TAPE INPUTS —These line level inputs allow the use of a CD or tape player for practice sessions.
POWER LED —The power LED illuminates when the power is ON.
POWER SWITCH —Turns power ON and OFF.
Input Volume
3 Band
Equalization
Line Output
Headphones Output
Power LED Power Switch
CD/Tape Inputs
Presence
Caring For Your
Amplifier
SHOCK HAZARD! The amplifier must have a
ground prong in the plug to help ensure that
it is grounded. DO NOT remove this prong to
fit the plug into a two-pronged outlet!
• DO NOT remove the grounding prong to fit the
plug into a two-pronged outlet!
• To keep the amplifier working properly, DO
NOT expose it to rain or moisture.
• DO NOT pull or lift the amplifier by the power
cord.
• UNPLUG the amplifier before cleaning, and
only clean with a damp cloth (no chemicals).