L-e-a-p feature, Model z-470 only) – GENNUM Z-280 User Manual

Page 25

L-E-A-P

Feature

(Model Z-470 only)

This feature is available while you are not on a call. When you use the L-E-A-
P ( ocal nvironment udio rocessing) feature, you will more clearly hear
the person you are in face-to-face conversation with, because the headset
uses its advanced noise reduction algorithm to minimize the amount of
background noise you hear. Two L-E-A-P modes are available,namely L-E-A-
P

1 and L-E-A-P

2. L-E-A-P

1, set for normal listening, is factory

programmed to provide a transparent effect which allows the user to
continuously wear the headset without plugging their ear. L-E-A-P 2 is set
up to provide additional amplification and noise reduction. L-E-A-P

2 has

been designed for challenging noisy environments.

On initial power-up,you will hear a single beep as the headset defaults to

the L-E-A-P

1 mode. Use the volume control to adjust the volume

level into your ear

To turn on the L-E-A-P

2 mode, quickly press and release the SIDE

button. You will hear 2 beeps indicating you are in the LEAP 2 mode.
Use the volume control to adjust the volume level into your ear.

You may toggle between these two modes by quickly pressing and

releasing the SIDE button

Page 25