Fujitsu Siemens Computers AMILO Pro V2035 - Manual (Page 70)

Settings in BIOS Setup Utility
60 A26391-K183-Z121-1-7619, edition 1
Exiting BIOS Setup Utility
To exit BIOS Setup Utility, select the Exit menu from the menu bar. You can then decide which
settings you want to save. The Exit menu offers the following options.
►
Mark the desired option with the cursor keys  or ‚ .
► Press the Enter key to confirm your selection.
Exit Saving Changes - save settings and exit BIOS Setup Utility
►
Select OK to save the current settings in the menus and exit the BIOS Setup Utility.
The device is rebooted and the new settings come into effect.
Exit Discarding Changes - Reject changes and exit BIOS Setup Utility
► Select
OK to discard the changes.
The settings which were in force when BIOS Setup Utility was called remain effective. BIOS Setup
Utility is terminated and the device is rebooted.
Load Setup Default - Apply default settings
► Select
OK to apply the default settings for all menus of the BIOS Setup Utility.
The device restarts and the default settings become effective.
Discard Changes - Reset settings
► Select
OK to load the settings for all menus that were valid when the BIOS Setup Utility was
started.
Save Changes
► Select
OK to save changes in between without exiting BIOS Setup Utility.