Settings in bios setup utility, Start bios setup utility, Operating bios setup utility – Fujitsu Siemens Computers AMILO Pro V2035 User Manual

Page 69

A26391-K183-Z121-1-7619, edition 1

Settings in BIOS Setup Utility

In BIOS Setup Utility you can set the system functions and the hardware configuration of the
notebook.
When it is delivered, the notebook is set to factory default settings. You can change these settings in
BIOS Setup Utility. Any changes you make take effect as soon as you save and quit the BIOS Setup
Utility.
The BIOS Setup Utility programme contains the following menus:
Main:

for system settings such as time and date

Advanced:

for system settings such as hard disks and monitor selection

Security:

for password settings and safety functions

Boot:

for configuring the boot sequence

Exit:

to exit the BIOS Setup Utility

Start BIOS Setup Utility

►

Reboot the notebook (switch off/on or reboot operating system).

The following or a similar display appears on the screen during booting:

BIOS Setup Boot Menu
►

When this message appears, press the function key F2 .

If a password has been assigned:
►

Enter the password and press the Enter key.

If you have forgotten the password, contact your system administrator or contact our
Hotline/Help Desk.

Operating BIOS Setup Utility

Press the F1 key to display help on the operation of BIOS Setup Utility.
The description of the individual settings is shown in the right-hand window of the BIOS
Setup Utility.
With the F9 key you can load the default settings of the BIOS Setup Utility.

►

Use the cursor key or to select the menu you wish to access to make changes.

The menu is displayed on the screen.
►

Select the option you want to change with the cursor keys or .

►

Press the Enter key.

► Press

the

ESC key to exit the selected menu.

►

For future reference, make a note of the changes you have made (for example, in this manual).

This manual is related to the following products:

V2030