Fujitsu Siemens Computers AMILO Pro V2035 - Manual (Page 67)

A26391-K183-Z121-1-7619, edition 1 57
Using the power-management features
If you use the possible energy saving functions in battery mode, the notebook uses less energy. You
will then be able to work longer when using the battery before having to recharge it.
You can set the power-management features for your notebook under Start - (Settings) - Control Panel
- Power Options.
i
Never switch the notebook off with the Suspend/Resume button while the notebook is in
one of the energy-saving modes.
When you are finished working with your notebook we advise you to come out of an
energy saving mode and then turn off as normal.
Never turn off your notebook while it is in an energy saving mode.
If the notebook is in an energy-saving mode mode:
●
Do not connect any external devices.
● Do not disconnect any external devices.
● Do not attempt to switch the notebook on if the built-in battery is flat.
● No memory modules may be removed or installed.
● Do not add or remove a PC card.
● Do not replace or remove the battery.
The operating system uses ACPI (Advanced Configuration and Power Interface) for power
management under Windows XP. The energy saving functions can be activated under Start -
(Settings) - Control Panel - Power Options.
Under Windows, Hibernate is activated by default.