Fujitsu Siemens Computers AMILO Pro V2035 - Manual (Page 44)

Using your notebook
34 A26391-K183-Z121-1-7619, edition 1
Manual removal (emergency removal)
In the event of a power failure or damage to the drive it may be necessary to manually remove the
CD/DVD.
►
Switch the notebook off.
1
► Press a metal pin or wire (e.g. paperclip) into the opening (1).
The drive tray is ejected. You can now pull the drive tray out of the drive and remove the CD/DVD.
Regional codes for DVD films and DVD players
DVD films and DVD players (e.g. the DVD drive of your notebook) are always provided with a
regional code. The regional codes of DVD films and DVD players must match so that the DVD film
can be played back.
There are six different regional codes:
●
Regional code 1: USA and Canada
● Regional code 2: Egypt, Europe, Japan, South Africa and the Middle East
● Regional code 3: Southeast Asia (including Hong Kong, Indonesia, Philippines, South Korea,
Taiwan)
● Regional code 4: Australia, New Zeeland, South Eastern Pacific, Central and South America
and the Caribbean
● Regional code 5: Africa (except South Africa), India and the former states of the USSR
● Regional code 6: China
The DVD drive of your notebook supports the function RPC-II (Phase II System of Regional Playback
Control). This function permits the final user to change the regional code of the drive up to five times
to play back corresponding DVD films. Then the last regional code selected is retained and cannot
be changed again.
i
If a DVD film is to be watched in all regions, it has the regional code 0.
Before buying a DVD film you should check that the regional code of the DVD film
matches the regional code set for the optical drive of your notebook.