Fluke Ti45 - Manual (Page 71)

Camera Setup
Saving and Reloading Camera Settings
6
6-7
To save current camera settings to the camera’s internal memory or to a
Compact Flash card:
1. Tap F.
2. Use the MOUSE controller to position the pointer over Camera Settings
on the popup menu.
3. Tap E.
4. Position the pointer over the Save tab and tap E.
5. Position the pointer over either Compact Flash or Internal in the Save
Settings To row and tap E.
6. Tap the TRIGGER button to accept setting change and return to scan
target mode.
To reload camera settings from the memory card or to load camera settings
from a different card without powering off the camera:
1. Tap F.
2. Use the MOUSE controller to position the pointer over Camera Settings
on the popup menu.
3. Tap E.
4. Position the pointer over the Save tab and tap E.
5. Position the pointer over Compact Flash in the Load Settings From row
and tap E.
6. Tap the TRIGGER button to accept setting change and return to scan
target mode.
To restore factory settings:
1. Tap F.
2. Use the MOUSE controller to position the pointer over Camera Settings
on the popup menu.
3. Tap E.
4. Position the pointer over the Save tab and tap E.
5. Position the pointer over Restore Factory Settings and tap E.
6. Tap the TRIGGER button to accept setting change and return to scan
target mode.