Furman Sound PST-10D - Manual (Page 9)

9
distance from the two mounting hole drilled into your wall, rack or
cabinet surface. Once the screw is fastened flush with the surface,
back it out approximately ½” . The screw head should push through
the crossed cutout on the bottom surface of the Power Station. Next,
simply allow the Power Station to move down and seat into the end
of its oval cut-out. Adjust the pan head screw if necessary.
Warranty
To Register for the following warranty please visit Furman’s website at www.
furmansound.com and click on the “warranty” page, or call Furman at (707) 763-1010.
Furman Sound, Inc. warrants to the original purchaser of this product, the Furman
PST-10D, that the product will be free from defects in material and workmanship
for a period of three years from the date of purchase. The purchaser of the product
is allowed fifteen days from the date of purchase to complete warranty registration
by mail or on-line at the Furman website. If the purchaser fails to complete the
aforementioned registration, the warranty period will be reduced to one year from
the date of purchase.
If the product does not conform to this Limited Warranty during the warranty
period (as herein above specified), purchaser shall notify Furman in writing of the
claimed defects. If the defects are of such type and nature as to be covered by
this warranty, Furman shall authorize the purchaser to return the product to the
Furman factory or to an authorized Furman repair location. Warranty claims should
be accompanied by a copy of the original purchase invoice showing the purchase
date; this is not necessary if the Warranty Registration was completed either by
mailing in the completed warranty card or by registering on-line at the Furman
website. Shipping charges to the Furman factory or to an authorized repair location
must be prepaid by the purchaser of the product. Furman shall, at its own expense,
furnish a replacement product or, at Furman’s option, repair the defective product.