Flymo EM032 - Manual (Page 9)

Environmental Information
• Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal
information.
The symbol on the product or on its packaging indi-
cates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable col-
lection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the envi-
ronment and human health, which could otherwise be
caused by inappropriate waste handling of this product.
For more detailed information about recycling of this prod-
uct, please contact your local council office, your house-
hold waste disposal service or the shop where you
purchased the product.
5054854-01
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Husqvarna UK Ltd.
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - 01325 302302 Fax - 01325 310339
EC Declaration of Conformity
Husqvarna UK Ltd., Aycliffe Industrial Park
Newton Aycliffe, Co. Durham, DL5 6UP, England
Declare under our sole responsibility that the product(s);
Category........................................ Electric Rotary Lawnmower
Model(s)......................................... VM032, VM032+, RM032, EM032, EM032+
Identification of Series................... See Product Rating Label
Year of Construction...................... See Product Rating Label
Complies with the essential requirements & provisions of the following EC Directives:
98/37/EC (until 31.12.09), 2006/42/EC (from 01.01.10), 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN836, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
pA
at the operator’s position, recorded on a sample of the above prod-
uct(s) corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the Value given in the table.
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated
figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Newton Aycliffe, 10/12/2008
M. Bowden,
Research & Development Director
Husqvarna UK Ltd.
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (RPM)
Power (W)
Measured Sound Power LWA (dB(A))
Guaranteed Sound Power LWA (dB(A))
Level (dB(A))
Value (m/s 2 )
Weight (Kg)
Voltage/Hertz
VM032
32
3,600
1100
95
96
80.2
2.08
9.09
230V/50HZ
VM032+
32
3,600
1200
95
96
80.2
2.08
9.09
230V/50HZ
RM032
32
3,600
1000
95
96
80.2
2.08
8.97
230V/50HZ
EM032
32
3,600
900
95
96
80.2
2.08
8.74
230V/50HZ
EM032+
32
3,600
1000
95
96
80.2
2.08
8.74
230V/50HZ