Foster Gas Oven KS 90 User Manual
Page 13
IMPORTANT:
after adjusting the burner, check that the
flame is maintained at minimum
setting as follows:
1. turn the knob from min. to max. 2-3 times;
2. open and close the oven door continuously (neither too fast or too
slowly);
3. if the
flame goes out, adjust the by-pass setting (slightly increase the
minimum setting).
• Once you have finished (replacement of injector, adjustment of air and
minimum setting), switch the oven off and affix the new rating plate
(indicating the gas used)
on the oven.
BEFORE USING THE OVEN FOR THE FIRST TIME
Before using the oven for the first time, you should remove the accessories,
wash them in washing-up liquid and, when dry, refit them in the oven.
Pre-heat the oven to maximum temperature for approximately 20-30 minutes
in order to eliminate any unpleasant smells the first time it is switched on.
30