FELLOWES SafeCut Neutron Plus - Manual (Page 3)

3
SAFECUT™ SAFETY FEATURES
XXXXXXXX CHANGE SAFECUT CARTRIDGE
1. Slide cutting carriage to one
end into lock position.
CHANGING CUTTING STRIP
3. Turn cuting strip over to use
both sides.
2. Remove cutting strip off
trimmer base.
3 4
2. Lift carriage handle up.
2 3
4. Replacement strips available
(see accessory details).
4
1. Slide cutting carriage to one
end into lock position.
2
3. Pull SafeCut™ cartridge
upwards out of cutting carriage
and insert new cartridge (push
down to click into place).
4. Press yellow button to release
cassette from base. Return
into storage slot in base.
ACCESSORY PACKS
Wave Cut
Perforate
Fold (crease)
CRC# Pack contents
54113 3 Creative SafeCut™ blades (1x wave, 1x perforate, 1x fold)
54114 2 Straight SafeCut™ blades
54115 12” Cutting strips (x3)
Strip will need to be trimmed to fit Neutron™ and Neutron Plus models
54116 18” Cutting strips (x3)
Cutting capacity
(sheets 20 lb)
3 Creative SafeCut™ blades
5
5
3
The SafeCut™ LED Guide on the Electron
trimmer for illuminated precision. Safer
than laser guides.
The SafeCut™ cartridge system allows
users to change the cutting cartridge
without touching the blades.
1
1
To Order:
US: 800-955-0959 Canada: 1-800-665-4339