Fisher & Paykel 420182 - Manual (Page 11)

SPIN HOLD
DELAY START
CLOTHES CARE
SAFEGUARDS
9 WASH CYCLES AND OPTIONS
Use the spin HOLD option to:
• Remove drip dry garments from a mixed load
before the wash goes into spin.
• Minimize creasing that is caused when clothes are
left sitting in the machine at the end of the cycle.
When spin Hold is selected, your ecosmart will pause
at the end of rinse, beep and the spin light will flash
to tell you that it is waiting for another instruction.
Press START/PAUSE to begin the spin.
Delay Start will delay the start of the wash cycle for
1, 3 or 9 hours.
Press DELAY START once for a delay of 1 hour.
Press again for 3 hours, a third time for 9 hours
(and again to return to normal).
• Once you press Delay Start your ecosmart will
begin the delay period, you do not have to press
Start/Pause.
• Be careful if using Delay Start for non-colorfast
clothes as dyes may run if the clothes are damp.
• Your ecosmart will not beep at the end of the
cycle if Delay Start is selected.
To avoid accidentally damaging your clothes, there
are a few options that your ecosmart will not accept.
For example, you cannot select a hot wash on
Delicate, Permanent Press or Wool cycles.
*2228 F&P Ecowasher Bk 11/6/01 1:24 PM Page 9