Flymo VISION COMPACT 330 - Manual (Page 6)

Removing, Emptying and Refitting the Grassbox
Grassbox Full
• As the grassbox fills up, grass will be clearly visi-
ble through the window in the lid (M).
• When the window is full it is time to empty the
grassbox.
Emptying the Grassbox
• Stop the lawnmower, as described in ‘To Stop your
Lawnmower’ and wait until the blade has stopped
rotating, BEFORE lifting the grassbox lid.
1. Lift the grassbox lid and rest against the handles (N).
2. Remove the grassbox using the moulded handle
recesses as illustrated.(See Figure P).
3. Empty grassbox.
4 Replace grassbox and lid carefully.
• Failure to fit the grassbox and grassbox lid
correctly will cause poor collection of grass
clippings.
M
N
;;;;
;;;;
;;;;
P
grassbox is full
grassbox is
empty
R1 R2
R3 R4
Storing your cable in the Easi-Reel cable winder
1. Insert the female connector into the top of the
cable winder (R1)
2. Place the cable under the cable guide (R2)
3. Turn the cable winder (R3) until all of the cable is
wound in.(R4)
Warning:- When cable is fully wound, lid becomes
heavy
Unwinding the cable before re-use
1. Pull the cable by the plug and unwind the cable
fully.
• Ensure that the cable is released from the cable
guide (R2) before using your machine.
Easi-Reel Cable Winder