Fisher & Paykel HI120DMB1 - Manual (Page 7)

5
Installation instructions
Control panel
DELAY OFF SWITCH : Enables the island canopy to remain on a low, mid or high speed for five
minutes, to clear away all residual cooking odours before switching off automatically.
Fig.5 Control panel
Fan On/Off Mid Speed High Speed Delay Off Switch Light On/Off
Getting started quickly
10
Strip the plastic protective film off the two chimney pieces and place these over the corners.
Note: Fisher & Paykel logo to go to the front of the product. The lower chimney will rest on top
of the canopy hood and the upper chimney will be extended and secured to the ceiling bracket.
To ensure that the upper chimney does not slip inside the lower chimney, secure it so that the
upper chimney is showing. Duct tape or placing two screws/nails through the upper chimney
securing holes will do this.
11
Offer the island canopy, angle brackets, chimneys and ducting up to the ceiling bracket and
secure in place with eight screws provided, one per side per corner. The dimension between the
filters and the cooking surface should be in line with those suggested in the ‘Height of island
canopy’ section. An additional person will be required for this operation or a simple support
frame manufactured to the correct dimensions will aid assembly of the island canopy.
12
Finish assembling the ducting, ensuring the path is as short, straight and smooth as possible.
13
Connect to the supply and switch on the power using switch/socket outside the island canopy.
14
Slide the upper chimney piece up to the ceiling and secure in place with four screws supplied.