FELLOWES FS 3 - Manual (Page 3)

3
Specifications
Without Basket With Basket
FS3 FS5 FS3+ FS5+ S5
Sheet Capacity 3 5 3 5 5
20# (74gsm)/DIN A4, 70 g/m 2
Entry Width 9”/230mm
Shred Size 1/4”/7mm
Shredding Speed 14 fpm/4.2 mpm
Recommended Daily Usage 30 sheets
Power Source 120V/60Hz (North America)
230-240V/50Hz (Europe)
Dimensions (HxWxD) 5-3/4” x 13-11/16” x 3-3/8” 14-1/4” x 13” x 8-1/4”
146 x 348 x 86 mm 362 x 330 x 210 mm
Overload Protection
This shredder is protected by a built-in thermal overload device that serves to protect
the motor from overuse. When continuous shredding is conducted for an extended
period of time, the shredder will automatically turn itself off to cool down. When
shredding is automatically stopped, allow the unit to stand for about 30 minutes
before using it again.
Important Note
This paper shredder is not intended to shred high volumes of paper. Please refer to
the specifications for the recommended daily usage and sheet capacity of this
shredder. Please note that if the paper is wider than the entry, and you fold it to fit,
the paper thickness increases and the recommended capacity may be exceeded.
Limited Warranty
Fellowes Manufacturing Company warrants the cutting cylinders of all
Fellowes shredders to be free from defects in material and workmanship
for 1 year from the date of purchase by the original consumer. Fellowes
warrants all other parts of the machine to be free of defects in material
and workmanship for 1 year from the date of purchase by the original
consumer. If any part is found to be defective during the warrant period,
your sole and exclusive remedy will be repair or replacement, at Fellowes’
option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or
unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY
LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET
FORTH ABOVE. In no event shall Fellowes be liable for any consequential
or incidental damages attributable to this product. This warranty gives you
specific legal rights. You may have other legal rights that vary from state
to state.
For more detail or to obtain service under this warranty, please contact
Fellowes Customer Service at 1-800-955-0959, Monday through Friday, 8
AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on
machines purchased outside the USA, contact the appropriate location
listed in the
Contact for Service section of this instruction manual.
Warrantor: Fellowes Manufacturing Company.
Declaration of Conformity
Fellowes Manufacturing Company
Doncaster Road, Kirk Sandall • Doncaster, South Yorkshire, DN31H
England
declares that the product Models FS3, FS3+, FS5, FS5+
conforms with the requirements of the Low Voltage Directive (73/23
EEC) and the Electromagnetic Compatibility Directive (89/336 EEC) and
the following harmonized European Normes (EN Standards) and IEC
Standards.
Safety: EN60950 ‘Information Technology Equipment’
EMC: Performance
Standard Severity Level Criteria
EN 55014-2:1997 Categpry Level NA
EN 55104-1:1993 NA
+A1:1997
EN 61000-3-2:1995 Class A NA
EN 61000-3-3:1995 Section 6.1 (FS3) NA
EN 61000-3-3:1995 Section 5 (FS5) NA
Itasca, Illinois, USA _____________________
March, 2000 Anthony Storrie