Furuno MULTI-COMMUNICATION UNIT IB-782 - Manual (Page 12)

4
Calling from communication unit’s telephone to IB-782’s telephone
1. Pick up the receiver and listen for the dial tone.
2. Dial [*], [3], [0], party’s extension number (1-8), [#].
3. Talk with party.
4. Hang up the receiver upon completion of the call.
1.5 Forwarding a Call
A call may be forwarded to another telephone as follows:
How to forward a call
1. Without hanging up the receiver, press the [HOOK] key.
2. Dial telephone extension number and [#].
3. After the call has been forwarded, hang up the receiver.
Note:
The busy tone sounds if an invalid extension number is dialed. Cancel forwarding as
below.
Canceling forwarding
If the called party does not answer, cancel forwarding by press the [HOOK] key. You may
also cancel forwarding by hanging up the receiver.
1.6 Automatic Call Forwarding
Calls can be automatically forwarded to another telephone as follows:
Setting
Dial [*], [9], [0], [0], extension telephone number to forward call to, [#].
Note:
The SEND LED on the front panel lights when setting automatic call forwarding.
Cancelling
Dial [*], [9], [0], [0], [#]