Franklin eBook Reader - Manual (Page 16)

16
Sending a Word Between Books
You can look up words from this book in
certain other BOOKMAN books, and
vice versa.
To send or receive a word to or from
another book, you must have an installed
book card in your BOOKMAN that is
able to send or receive words, too. To
learn if a book card can send or receive
words, read its User’s Guide.
1. Highlight a word.
To highlight a word, press
ENTER
and
then press the arrow keys.
2. Hold ✩ and press
CARD
.
3. Highlight the other book.
4. Press
ENTER
.
The word that you highlighted
appears in the other book.
5. If needed, press
ENTER
to look
up the word.
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs erratically,
first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow the steps
below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases settings
and information entered into its built-in book,
and in an installed book card.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paperclip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOKMAN.
Resetting BOOKMAN
This unit may change operating modes due to
Electro-static Discharge. Normal operation of this
unit can be re-established by pressing the reset
key,
ON/OFF
, or by removing/replacing batteries.
➤ Troubleshooting BOOKMAN
• Make sure your book card, if any, is
installed correctly.
• Check that the book card’s metal
contacts are dirt- and dust-free.