FUJITSU A3040 - Manual (Page 19)

19
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.) The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
Figure 14. Boot Menu
Table 14: Fields, Options and Defaults for the Boot Menu
Menu Field Options Default Description
QuickBoot: ■ Disabled
■ Enabled
[Enabled] Turns on and off booting with a truncated set of Power On Self Test.
(Fewer tests mean faster turn on.)
Boot-time
Diagnostic Screen: ■ Disabled
■ Enabled
[Disabled] Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
Boot Menu: ■ Disabled
■ Enabled
[Enabled] This field is not active unless the Supervisor’s Password has
been set. When disabled, access to the Boot Menu with the
[F12] key is disabled. When enabled, the Boot Menu is enabled
and the [F12] key will allow you to display it..
Preboot Execution
Environment: ■ Disabled
■ Enabled
[Disabled] Turns on and off the preboot execution environment feature.
Advanced
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
v02.59 (C) Copyright 1985-2006, American Megatrends, Inc.
F1: Help Esc: Exit
BIOS SETUP UTILITY
▲
▲
▲
Quick Boot: [Enabled]
Boot Time Diagnostic Screen: [Disabled]
Boot Menu: [Enabled]
Preboot Execution Environment: [Disabled]
Boot Device Priority
Hard Disk Drives Priority
CD/DVD Drives Priority
B o o t M e n u