Fujitsu Siemens Computers Pocket LOOX 600 - Manual (Page 35)

Backing up data with LX Backup Operating Pocket LOOX 600
A26391-K120-Z120-1-7619 27
Restoring
The backup data saved on the memory card are restored in the RAM memory of the device. All data
in the RAM memory are restored as they were at the time of the backup. This also means that all
data currently in the RAM memory of the device are overwritten.
Ê Select Start - Programs - LX Backup .
Ê When the screen of the LX Backup appears, select the memory card from which the backup is
to be restored. Select either Memory Card or Memory Card 2 , depending on where the backup
data are located. LX Backup indicates whether backup data are present on a memory card and
when these were generated.
Ê Press the Restore button.
Ê LX Backup asks you whether you really want to restore the data. Press the Yes button if the data
are to be restored and the No button if this is not the case.
Ê A message is output when the restoration has been completed.
Ê When you press the OK button at the upper right, the device is reset and restarted.