FELLOWES POWERSHRED C-325CI - Manual (Page 3)

Eliminates frustrating jams by preventing overloads and powering through misfed paper.
JAM PROOF SYSTEM OPERATION*
*100% Jam Proof when used in accordance with user manual
STRAIGHT FEED
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds (C-325Ci).
• Empty wastebasket when bin full indicator lights up.
• Shredder won’t run if the door is open, or bin needs to be emptied.
• Maintenance is an important part of protecting your investment. Don’t forget our oil (35250) and shredder bags (36056).
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
2
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
Remove several sheets until
indicator is below red.
Continue 100% Jam
Proof Shredding
If a misfeed
occurs:
If illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
1 2 3
Up to RED: Too many
sheets have been inserted.
Up to GREEN: More sheets
can be added.
Up to YELLOW: Productivity
is optimized.
All indicators light up and
shredder pauses for 3-6 seconds Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
15
15
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
All cross-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
OILING SHREDDER FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
Shred one sheet
AUTO
AUTO AUTO
3
Press and hold forward
( ) 2-3 seconds
1
*Apply oil across entry
3 4
SAFESENSE ® TECHNOLOGY OPERATION
WHEN IN SLEEP MODE
SLEEP MODE
1 3
In sleep mode To get out of sleep mode
touch control panel
If Straight Feed indicator
illuminates, remove paper and
feed straight into shredder.
insert paper or
AUTO
AUTO AUTO
2
SET-UP AND TESTING
Turn the shredder ON
( ) to activate SafeSense
®
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 2 seconds
Shredder will shut off
AUTO
AUTO AUTO
1 2