Fisher-Price 79029 - Manual (Page 5)

5
Assembly
• Fit the upper rail onto the legs, as shown.
• Push down firmly above each leg until, you hear the upper rail
“snap” into place on each end.
• Pull up on the upper rail to be sure it is secure.
Note: Remove the tape on the legs and around the base
sockets. Throw the tape away.
1 1
1
2 2 2
3
3 3
4
4 4
5
• Fit the “T” end of the strap on the trumpet through the slot in
the upper rail. Pull the trumpet to be sure it is secure in the
upper rail.
6
Upper Rail
Trumpet
Upper
Rail Slot
Hint: You may want to use the end of a slotted screwdriver to push
the “T” end of the strap through the slot.
PUSH
PUSH
“T” End
• At an angle, fit the single tab on the bell into the slot in the
upper rail.
• Now, push and “snap” the other two tabs on the bell into the
slots in the upper rail.
• Position the mirror so that it is toward the inside of the product.
• Insert and “snap” the tabs on each end of the mirror into the
matching slots in the upper rail.
7
8
Bell
Upper
Rail
Slot
Mirror
Slots
PUSH