Fujitsu Siemens Computers N3510 User Manual

Page 18

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority Submenu is for setting the order for checking of sources for the operating system.

Figure 18. Boot Device Priority Submenu

■

Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by
mistake.

■

A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-
ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy
disk format is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive
format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C:
designation if a formatted internal hard drive is present since the C: designator is always reserved for the
internal hard drive. The boot sequence ignores the new drive designations, however, your application
software will use the new designations.

Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field

Description

+Floppy Disk Drive

+Hard Disk Drive

CD-ROM Drive

PXE

The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and then press the
[PgUp] or [PgDn] key to change the order number.

NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten,
depending upon your operating environment.

S424040M9AT00

TSHITADVD-RAM UJ-831S

/xx/xx

00h - FFFFh

Is:

Clear

ord Is:

Clear

Intel(R

Speed:

L1 Cach

L2 Cach

Memory

Total

Slo

Boot Menu

Pre-Boot Execution Environment

Boot Device Priority

Hard Disk Drive Sequence

Boot Device Priority

Cancel

Floppy

Hard Disk

CD-ROM

PXE