Importing a mono wav file, Mr-8hd/cd supplementary manual – Fostex MR-8HD/CD User Manual
Page 19
MR-8HD/CD Supplementary manual
MIN
MAX
10
0
L
R
10
0
L
R
10
0
L
R
R
L
MIN
MAX LINE
MIC
LINE
MIC
LINE
MIC
LINE
MIC
REC SELECT
0
10
1
2
3
4
5/6
MASTER
MAX
MAX
MIN
MIN
7/8
LOCATE REC END
A-B PLAY
LOCATE ABS ZERO
PLAY
STOP
RECORD
REWIND
F FWD
GUIDE
RHYTHM
CONTRAST
1-8 >SONG
NEW
1-6 > 7/8
1-4 > 5/6
STEREO
WAV FILE
BOUNCE
POWERFUL
MASTERING
B / OUT
A / IN
LOCATE
STORE
PLAY MODE
AUTO PUNCH
NATURAL
BRIGHT
TIME BASE
SELECT
UNDO/REDO
7/8 >
MENU / ENTER
SIMULATION
DYNAMIC
CONDENSER
TUBE
MIC
PAN
EFFECT
REVERB / DELAY TIME
HALL
ROOM
PLATE
DELAY
PHONES VOL
L
STEREO OUT
R
2
PHONES
1
MAX
MIN
BAL
BAL
BAL
TRIM
UNBAL
PEAK
TRIM
UNBAL
PEAK
TRIM
UNBAL
PEAK
PEAK
DISTORTION
GUITAR
/GUITAR
INPUT A SELECT
INSERT
BAL
UNBAL
TRIM
INPUT A
INPUT B
INPUT C
INPUT D
ON/
OFF
POWER
ABC1
DEF2
GHI3
JKL4
MNO5
PQR6
STU7
VWX8
YZ9
+-_0
DELETE
TO STEREO BUSS
EFFECT SEND
ON/
OFF
ON/
OFF
ON/
OFF
60'S COMBO
US METAL
BRIT STACK
AMP SIMULATION
INPUT A
PC
Importing a mono WAV file
You can import (copy) a mono WAV file of track data recorded/edited on a PC or backup
data from a CD-R/RW disc to the hard disk of the MR-8HD/CD.
The following description assumes that a CD-R/RW disc which contains one or more
mono WAV files is set to the internal CD-R/RW drive, while a "
New Song
" is loaded to the
MR-8HD/CD (see page 31 of the original manual for details about how to create a "
New
Song
").
You can import a mono WAV file from a CD-R/RW disc only using the internal CD-R/RW drive.
You cannot import a mono WAV file from a CD-R/RW disc using an external CD-R/RW drive connected to the
[USB HOST] port.
CD-R/RW disc which contains a mono
WAV file of track data recorded/edited on a
PC or backup disc
MR-8HD/CD
10)
Use the [MENU/ENTER] knob to select
"[EXECUTE]" and press the [MENU/ENTER] knob.
The unit starts exporting track data to the CD-
R/RW disc. When completed, "
Completed
" is
shown on the display and the disc is
automatically ejected. If you want to cancel
exporting, select to "
[CANCEL]
" and press the
[MENU/ENTER] knob.
11)
Press the [MENU/ENTER] knob.
The display now shows the CD-RW menu screen,
where "
Song Export
" is highlighted.
12)
Press the [STOP] key to exit the MENU mode.
You can also exit the MENU mode by selecting
"
Back
" and pressing the [MENU/ENTER] knob
repeatedly.
When you copy a mono WAV file of track data recorded/edited on a PC to a CD-R/RW disc and then
import it to the MR-8HD/CD, give the file name as below.
"{Song name}_{Track number}"
(Example: "My Song_1", "My Song_2" .... "My Song_8")
By giving the file name as above, a file is automatically imported to the corresponding track of the destination
song ("My Song_1" to track 1, "My Song_2" to track 2, etc.).
Note that when you import data of a backup disc created by the procedure described in "Exporting song data to
a CD-R/RW" above, a file is copied to the same track from which data has been exported.
19