Faria Instruments GW0016 - Manual (Page 6)

b) Imperial gallons. Display will show
c) Liters. Display will show
Leaving the display in one of the items
above while the “Mode” button is pressed
and held for more than one second will save
the selected units.
Trip Fuel Consumed
Displays fuel consumed since last reset. This
function can be reset to zero before a trip to
show fuel consumed during the trip. Display
shows “TRPXXX.X.”
Pressing the “Mode” for more than one
second will access the options that are
available for this function.
A short press of the “Mode” button advances
the display through the options. Display will
show “TRPXXX.X.”
Options are:
a) Clear Trip Fuel Consumed. Display will
show “CLR TRP.”
Pressing the “Mode” button for more
than one second while the display shows
“CLR TRP” will clear the trip amount and
set the menu back to the Trip Fuel Consumed
function.
A quick press of the “Mode” button will
skip this feature.
b) Adjust Trip Fuel Consumed, (fuel flow
calibration). Display will show “ADJ
TRP.”
Pressing the “Mode” button for more than
one second will cause the display to go into
the Trip Fuel Consumed adjustment menu.
The display will show “ADJXXX.X.”
Pressing and holding the “Up” button will
increase the amount and pressing and
holding the “Down” button will decrease
the amount.
Page 5