Futrex 5000/XL User Manual
Page 11

10
Then the number "2a" will be displayed.
4g)
Remove the Light Wand and replace it on the same point on the biceps. Press ENTER. The display will flash a decimal
point, then the number "1b".
4h)
Place Light Wand firmly on Triceps of same arm (see page 15 for exact measurement point).
Press ENTER. The display will flash a decimal point. Don't move Light Wand until "2b" is displayed.
4i)
Remove Light Wand and replace it on the same point on the triceps. Press ENTER. The display will flash a decimal point.
Don't move Light Wand until "1c" is displayed.
4j)
Place Light Wand firmly on thigh at same side of body that the arm was measured; e.g. if right arm, then measure right
thigh. (See page 16 for exact measurement point.)
CAUTION:
Do not move the Light Wand while the decimal point is illuminated. The actual measurement
is being made at that time.
NOTE: Aim silver stripe directly toward the shoulder. Keep arm relaxed.
NOTE: Aim silver stripe directly up the leg. Press ENTER. The display will flash a decimal point. Don't move Light
Wand until "2c" is displayed.