Freecom Technologies Hard Drive Dock - Manual (Page 6)

Freecom HD Dock
6
EN
1
Chapter 1: Start Up the HD Dock
1.1 HDD installation for ." or ."
1. Connect the cable of the power supply to the Freecom
HD Dock and the power supply itself to the socket.
2a. USB: Connect the USB cable to the USB port on the HD
Dock (for data transfer with USB).
or
2b. eSATA: Connect the eSATA cable to the eSATA port on
the HD Dock (for data transfer with eSATA).
3. Vertically insert the hard drive into the drive slot, make
sure the hard drive matches firmly with the connector
inside the dock.
4. Switch on the HD Dock.