FUJITSU A3110 - Manual (Page 23)

23
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Figure 13. Hard Disk Security Submenu
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field Options Default Description
Drive0 Password Is: ___ Clear Display-only. Default is Clear. When the Drive0 Password has
been set, the field changes to Set. When this password is set, the
primary hard disk drive cannot be used in another system unless
the password is entered.
Set Drive0
Password ___ [Enter] Sets, changes or cancels the Drive0 Master Password. The Drive0
Master Password may be up to seven characters long and must
include only letters or numbers (no symbols). Passwords are NOT
case-sensitive. When a Drive0 Master Password is set, it must be
used to access the hard drive if it is used in another system. Note
that the password will not take effect until the system has been
rebooted.
Password Entry on
Boot: ■ Disabled
■ Enabled
[Enabled] When set to disabled, entry of a Hard Disk Password is not
required before OS boot. (The hard disk is still password-pro-
tected without password entry.)
BIOS Setup Utility
F1: Help Esc: Exit
v v v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.
Main Advanced Security Boot Info Exit
Hard Disk Security
Drive0 Password Is: Clear
Set Drive0 Password [Enter]
Password Entry on Boot: [Enabled]
I n f o M e n u