Yamaha Soavo-3 - Manual (Page 5)

4 En
Eng
lish
Before connecting the speaker cable, you must remove the jumper cable.
Red (+) Black (–)
Woofer terminals
Soavo-3 (R) Soavo-3 (L)
Amplifier
Jumper
cable
Amplifier
Soavo-3 (R) Soavo-3 (L)
Tweeter/
Mid-range terminals
Both SPEAKERS A and
B should be connected.
When your amplifier has two sets
of speaker output terminals. When your amplifier has only one
set of speaker output terminals. To connect the speaker to the
output terminals of the amplifier,
two pairs of cables for each of the
woofer and the tweeter are used
instead of standard connections.
This type of connection decreases
the modulation distortion caused by
electric resistance of the cables and
driving current of the speakers.
Consequently, purer sound quality
can be expected.
Before connecting the speaker
cable, you must remove the
jumper cable.
When using a banana plug
1 Unscrew the terminal knob.
2 Remove the cover by pulling it toward you.
3 Tighten the terminal knob.
4 Simply insert the banana plug into the terminal.
2
1
3
4
Banana plug