FOCUS Enhancements DR-DV5000 - Manual (Page 4)

NO OUTPUT – When NO OUTPUT is
selected and DR-DV5000 is in STOP mode,
there is no signal output via the DV port. For
example, if DR-DV5000 is in AV/C CONTROL
MODE and is being controlled by a DV device
via FireWire such as a DV VTR, it is necessary
to use the NO OUTPUT setting.
3.0 FORMAT DISK UPDATE
The format disk function on DR-DV5000 has
been enhanced. When multiple disk drives are
connected (internal and/or external), it is now
possible to select which disk you would like to
format. When you select FORMAT from the
DR-DV5000 UTILITIES menu, you will be
asked to confirm which disk you wish to format.
To select between available disk drives, press the
forward and backward index buttons on the
DR-DV500 front panel (drives are ordered
according to when they were formatted. The
oldest format will appear as Volume 1).
WARNING: FORMAT ERASES ALL DATA
ON THE DISK DRIVE!
Finally, select YES to begin the format process.
FireStore DR-DV5000 User Guide Addendum
FOCUS Enhancements, Inc.
1370 Dell Ave. Campbell, CA. 95008 USA
Telephone: 408 866-8300 Fax:408 866-4859 www.FOCUSinfo.com
MANL-0952-02 PAGE 3