beautypg.com

Controls and features – FORD 1998 Mustang User Manual

Page 62

background image

1. Insert the first previously programmed
SecuriLock

௢ key into the ignition and turn the

ignition from OFF to RUN (maintain ignition in RUN
for at least one second).

2. Turn ignition to OFF and remove the first
SecuriLock

௢ key from the ignition.

3. Within five seconds of turning the ignition to OFF,
insert the second previously programmed
SecuriLock

௢ key into the ignition and turn the

ignition from OFF to RUN (maintain ignition in RUN
for at least one second but no more than 5 seconds).

4. Turn the ignition to OFF and remove the second
SecuriLock

௢ key from the ignition.

5. Within 10 seconds of turning the ignition to OFF,
insert the unprogrammed SecuriLock

௢ key (new

key) into the ignition and turn the ignition from OFF
to RUN (maintain ignition in RUN for at least one
second). This step will program your new
SecuriLock

௢ key.

6. To program additional SecuriLock

௢ key(s), repeat

this procedure from step 1.

If the programming procedure was successful, the
new SecuriLock

௢ key(s) will start the vehicle’s

engine. The theft indicator (located on the
instrument cluster) will light for three seconds and
then go out.

If the programming procedure was not successful,
the new SecuriLock

௢ key(s) will not operate the

vehicle’s engine. The theft indicator will flash on and
off. Wait at least one minute and then repeat the
procedure from step 1. If failure repeats, bring your
vehicle to your dealership to have the spare
SecuriLock

௢ key(s) programmed.

Controls and features

62