Meridian Audio LD100/LD100U - Manual (Page 16)

ST or st This command will return a string showing
the current settings of the LD100.
Example:
HELP or help This command will return a list of
commands used for the LD100
Line Doubler.
LD100 Local / Remote Operation
The LD100 stores all of it’s settings in a Non-volatile
ram and will return to the last known settings when
the unit is power up. The only exception is the
Freeze function. The Freeze function will be set off
during the power up cycle.
When a command is received via the RS-232, only
those functions are placed in the remote mode. If a
pot function is set via the remote, it can be returned
back to local mode by adjusting that function on the
front panel. This is accomplished by creating a win-
dow around that function when in remote mode. If
that function is turned beyond the window setpoint,
that function is returned to local mode and becomes
active again.
Command String Examples:
Commands can be as simple as:
LD100,B150(CR)
to complex as
LD100,D240,N20,C150,B102,V,T0,A1,F0(CR)
Note (CR) = Carriage Return (OxOd) or ASCII 13
15
APPENDIX A
LD100:B###,C###,K###,T###,N###,D###,V,T1,A1,F0
(Y)
(R) Freeze
(X) Digital Filter
Auto-Tint
Input Select
Detail Level
Noise Level
Tint Level
Color Level
Contrast Level
Brightness Level
Header