Yamaha BRX-610 - Manual (Page 39)

SETUP MENU
37
En
Eng
lish
SETTINGS
The default settings are marked with “ * ”.
■ TV
[3D Output]
You can select 3D or 2D video output from this unit.
Even if you set [3D Output] to [Auto] and play back a BD 3D
disc, this unit selects 2D images depending on the connection and
the setting of TV, etc (p. 13).
[TV Screen]
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
[Video Out Select]
You can select the video output resolution from
[Composite], [HDMI Auto], [HDMI 1080p], [HDMI
1080i], [HDMI 720p], [HDMI 480p/576p], and [HDMI
480i/576i]. When set to [HDMI Auto], resolution is set to
the maximum resolution according to the connected TV.
For more details on output formats, refer to “About the
video output formats” (p. 40).
Composite, HDMI Auto * , HDMI 1080p, HDMI 1080i, HDMI
720p, HDMI 480p/576p, HDMI 480i/576i
• When you connect your TV and this unit via the VIDEO jack,
select [Composite], [HDMI 480p/576p], or [HDMI 480i/576i].
• To output HD audio (such as Dolby TrueHD or DTS-HD) from
the HDMI terminal, set [Video Out Select] to [HDMI Auto] or
more than [HDMI 720p].
[TV System]
You can select [TV System] from [PAL], [NTSC] and
[Multi]. Set the same TV System as your TV set. For more
details on output formats, refer to “About the video output
formats” (p. 40).
[Color Space]
You can select the Color Space (p. 50) output from
HDMI. This function is available when this unit is
connected with an HDMI cable.
This function is only available on TVs that support this function.
[HDMI Deep Color]
When your TV is compatible with Deep Color (p. 50), set
this item according to your TV. This function is available
when this unit is connected with an HDMI cable.
30 bits, 36 bits, Off *
Display Setting
Auto* This unit automatically selects 3D or 2D videos.
Off This unit always selects 2D videos.
Note
16:9 Full Select this when this unit is connected to a TV with a
16:9 screen. When a 4:3 aspect ratio video is played
back, the video is displayed as shown below.
16:9 Normal * Select this when this unit is connected to a TV with a
16:9 screen. When a 4:3 aspect ratio video is played
back, the video is displayed as shown below.
4:3 Pan Scan Select this when this unit is connected to a TV with a
4:3 screen. When a 16:9 aspect ratio video is played
back, the video is displayed as shown below.
4:3 Letterbox Select this when this unit is connected to a TV with a
4:3 screen. When a 16:9 aspect ratio video is played
back, the video is displayed as shown below.
Original
image size
On 16:9 (wide screen) TV
16:9 Full 16:9 Normal
4:3
Original
image size
On 4:3 TV
4:3 Pan Scan 4:3 Letterbox
16:9
Notes
NTSC, PAL * , Multi (Asia, China, Europe and Russia models)
NTSC * , PAL, Multi (U.S.A. and Canada models)
YCbCr 4:4:4 * Sets Color Space to YCbCr 4:4:4.
YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2.
Full RGB When RGB is set and white and black on the screen
are too faint, select this item. This setting is effective
when a connected component supports RGB 0-255
range.
RGB Outputs video signal at normal signal range.
Note