Franklin KJB-440 - Manual (Page 16)

15
Resetting Your BOOKMAN
If the keyboard fails to respond, or if the
screen performs erratically, first press
CLEAR and then press ON/OFF twice.
If nothing happens, follow the steps be-
low to reset it.
Warning: Pressing the reset button
with more than light pressure may per-
manently disable your BOOKMAN.
Also, resetting BOOKMAN erases set-
tings and information entered in its built-
in book and in an installed book card.
1. Hold CLEAR and press ON/OFF.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
the BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of the
BOOKMAN. Look for it on the
battery cover or near the book card
slot.
Book Card Care
• Do not damage the contacts
on the book cards or slot.
Caution: Touching these electrical
contacts with statically charged ob-
jects, including your fingers, could
erase information entered in a book
card or built-in book.
• Do not expose the book cards
to heat, cold, or liquids.
• Do not put excessive pressure
on the book cards.
LBS.
This unit may change operating modes due
to electrostatic discharge. Normal opera-
tion of this unit can be re-established by
pressing the reset button, ON/OFF, or by
removing or replacing the batteries.