beautypg.com

Festool DS 400 Q User Manual

Page 3

background image

3

1

Symbols

V

volts

A

amperes

Hz

hertz

W

watt

alternating current

n

0

no load speed

Class II Construction

rpm

revolutions per minute

spm

strokes per minute

2

Intended use

The sanders are designed for sanding wood,

plastic, composite materials, paint / varnish,

filling material and similar materials. Metal and

materials with an asbestos content must not

be processed with these tools.

The machine is particularly suitable for

processing smaller surfaces and overhead work

because of its size, its weight and its output.

The machines must not be damp nor operated

in a damp environment for electrical safety

reasons. The machines may only be used for

dry sanding.

The user bears sole responsibility for any da-

mage or accidents resulting from incorrect use.
3

Electrical connection and operation

The mains voltage must correspond with the

voltage on the rating plate!

See the following Fig. for connecting or dis-

connecting the power cord of the tool.

Always switch the machine off

before connecting or disconnecting the power

cable!

21 Check for misalignment or binding of

moving parts, breakage of parts, and any

other condition that may affect the tools

operation. If damaged, have the tool

serviced before using. Many accidents are

caused by poorly maintained tools.

22 Use only accessories that are

recommen-ded by the manufacturer for

your model. Accessories that may be suitable

for one tool, may become hazardous when used

on another tool.
Service

23 Tool service must be performed only by

qualified repair personnel. Service or

maintenance performed by unqualified personnel

could result in a risk of injury.

24 When servicing a tool, use only identical

replacement parts. Follow instructions in

the Maintenance section of this manual. Use

of unauthorised parts or failure to follow

Maintenance instructions may create a risk of

electric shock or injury.

Technical data

DS 400 Q

DS 400 EQ

Wattage

W

200

200

No load speed

rpm

13 000

6 000 - 13 000

No. of strokes

spm

26 000

12 000 - 26 000

Sanding stroke

mm

2.0

2.0

Sanding base (delta form) mm

100 x 150

100 x 150

Weight

kg

1.3

1.3

Safety llevel

UL 745, CSA C22.2 No. 745

WARNING

Various dust created by power sanding, sawing,

grinding, drilling and other construction

activities contains chemicals known (to the

State of California) to cause cancer, birth

defects or other reproductive harm. Some

examples of these chemicals are:

- lead from lead-based paints,

- crystalline silica from bricks and cement and

other masonry products, and

- arsenic and chromium from chemically-

treated lumber.

The risk from these exposures varies,

depending on how often you do this type of

work.

To reduce your exposure to

these chemicals: work in a

well ventilated area, and

work with approved safety

equipment, such as dust

masks that are specially

designed to filter out micro-

scopic particles.

This manual is related to the following products: