Follett E-ITS3250-90 User Manual
Page 5
5
Breaking ice bridges
I
t may be necessary to use the paddle to break up
ice bridges that occur along the sides and in the
middle of the bin. This often happens if ice has been
held in storage for a period of time without use.
Use supplied paddle accessory to break up bridges
(see caution below):
1. Completely knock down all ice from sides and
back of bin.
2. Knock down any bridge that has occurred in
middle.
3. Agitate paddle back and forth to break up
congealed ice mass.
SMARTGATE operation
SMARTGATE can be adjusted and locked at one of
several levels to accommodate flow characteristics of
different types of ice.
Bin is shipped with SMARTGATE in full down position.
SMARTGATE can be raised and locked in higher
position for better flow or when more access is needed.
do nOT dig up at ice. Instead, break away “legs” that are holding bridges. Ice above
will then fall.
To avoid injury, do not attempt to break up bridged ice through upper windows or
hopper shutter door. A falling ice bridge can cause paddle to lift. Keep head and face
away from paddle handle to avoid injury.
!