Yamaha A-S700 - Manual (Page 5)

CONTROLS AND FUNCTIONS
3
En
INTRODUCTION
Engli
s
h
C PURE DIRECT and indicator
Reproduces any input source in the purest sound possible.
The indicator above it lights up when this function is
turned on. See page 10 for details. D VOLUME
Control the sound output level.
This does not affect the REC level for recording.
■ Controlling this unit
1 Infrared signal transmitter
Sends signals to the main unit.
2 POWER ( )
Turn on the unit.
This button is operational only when POWER on the front panel
is pressed inward to the ON position.
3 STANDBY ( )
Set this unit to the standby mode.
• This button is operational only when POWER on the front
panel is pressed inward to the ON position.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
control.
4 Input selector buttons
Select the input source you want to listen to.
5 Amplifier control buttons
INPUT l / h
Select the input source you want to listen to.
VOL +/–
Control the sound output level.
This does not affect the REC level for recording.
MUTE
Mute the sound output. Press MUTE again to resume the
audio output. Selected Input indicator blinks when the
sound is muted.
■ Controlling other components
The functions of the buttons to control other Yamaha
components are the same as those of the corresponding
buttons on those components. Refer to the components’
instruction manuals for details.
6 Yamaha tuner control buttons
Control various functions of Yamaha tuner. Refer to the
owner’s manual of your tuner for details.
Not all Yamaha tuners or functions can be controlled by this
remote control.
7 Yamaha CD player control buttons
Control various functions of Yamaha CD player. Refer to
the owner’s manual of your CD player for details.
Not all Yamaha CD players or functions can be controlled by this
remote control.
Remote control
Note
Notes
Note
Note