Fisher PJ-Net - Manual (Page 16)

16
Chapter 2 Installation
x Installation and Network configuration
Mounting
✐ The AC cord must be disconnected when mounting or removing this product otherwise it
may damage the product.
✐ Do not connect the AC cord until after connecting the LAN cable and computer.
Caution !
1
Disconnect the AC plug from the
projector.
2
Remove the connector cover
and screw covers from the pro-
jector and insert plug on this
product to the option connector.
3
Tighten two screws by using a
coin etc.
Connector cover
Screw cover